For example, if you want the pants to stop about 2 in (5. 1 cm) from the bottom of the teddy bear’s foot, then make a mark at this location on the paper. If you want the skirt to come only to the middle of the teddy bear’s legs, then mark this location. If you do not want to make your own pattern, you can buy one in a craft supply store or find a pattern online for the size of the bear you have. [2] X Research source

Work on a flat surface while you do this to avoid getting wrinkles in your fabric. You may use any type of fabric you like to make your teddy bear clothes.

When you are finished cutting, you will have 2 equal-sized fabric pieces.

Make sure to cut the excess thread if you sew to create the seam. Press the fabric layers together if you are securing them with glue.

Do not insert pins along the hem of the fabric! The top and bottom edges need to remain open to get the item onto the bear’s body.

Position the stitches about 0. 25 in (6. 3×1015 am) from the raw edges of the item. Remove the pins as you sew. Dispense the glue about 0. 25 in (6. 3×1015 am) from the raw edges of the item. Allow the item to dry for at least 8 hours before removing the pins.

If you want to create a specific kind of teddy bear shirt, use a pattern instead. You can purchase teddy bear clothing patterns in a craft supply store or find free patterns online. [10] X Research source Keep in mind that getting the right fit may be more complex depending on the shape of the bear’s body. You can use any type of fabric that you want to make a teddy bear shirt.

This extra fabric will provide the seam allowance for your teddy bear’s shirt.

Be careful not to create any jagged edges as you cut. Go slowly and make long, even cuts.

Remove the pins as you sew. Do not sew over the pins or you may damage your sewing machine. If you are using glue to secure the seams, allow the glue to dry for 8 hours before removing the pins.

Use a soft tape measure to find the desired strap length. You can also substitute ribbon for the shirt straps.

Leave the hemmed edges unpinned. The top and bottom of the shirt will be where you hemmed the fabric, so it is important to leave these areas open.

Remove the pins and do not sew across them! Leave the pins in place while the glue dries (about 8 hours).

Make sure to avoid sewing over the pins. Leave the pins in place for at least 8 hours if you are using glue to secure the straps.