Velcro tabs consist of two parts called a hook and loop fastener system. The rougher side is called the hook, and the softer side is called the loop. The hook is generally the part that collects the debris because this is the part of the Velcro that grabs and sticks. It is possible that over time your Velcro will stop being sticky because the hooks get damaged. In this case, cleaning will only do so much and you may have to replace the Velcro if you cannot restore its grabbing power.
Be careful not to grab and pull on the hooks with the tweezers. You might damage them and cause your Velcro to be less sticky.
You can use any small, thin, and needle-like object for this method. Just make sure that it is sturdy enough to pull out debris that might be really stuck in the Velcro without bending.
Make sure the teeth of the comb are not so fine and delicate that they could break as you scrape out debris.
A stiff-bristled toothbrush works best, or you can use another kind of stiff brush like a dish brush or a pet brush. Be careful not to scrub too hard or you might damage the hooks on the Velcro. This is why it’s important to work parallel to the hooks so that they keep their form as you brush out debris.
Velcro is designed to be sticky and will easily grab onto things like blankets or clothes from which it will pick up lint.
Wash garments that contain Velcro separately from other items when possible.
If air drying isn’t possible, then keep the Velcro tabs closed and dry the garments in the dryer separately from other items.
