A room with several open windows can work, or you can repair it outside.
Check the instructions on your epoxy packages beforehand. Some glues might come pre-mixed, so you don’t have to worry about stirring them together. Silicone caulk is also a good option for repairing a broken terracotta pot. You can also buy caulk in a color that best matches your pot![4] X Research source
You can find powdered clay online, or at your local ceramics or craft store.
You only need to spread epoxy on the bottom portion of your pot. Don’t worry if you use too much epoxy—you can always wipe off the excess with an acetone-soaked towel or cloth. [7] X Research source
Don’t use your pot until the epoxy is completely dried and cured.
Depending on the break, you may need to hold the broken shard in place.
Essentially, you’ll be threading the wire through these marks to “sew” the pot back together.
Don’t use a standard drill bit for this—you don’t want to damage your equipment or pot.
This wire will be the “thread” that sews your pot back together.
Once you’ve twisted and pushed in all your wires, you can use your pot again.
