Nails placed through a wood post into a wood panel. Screws connecting the post to the fence via a detachable panel. Tension bands holding wire mesh to the post.
Creating a semi-circular hole will be more than enough for most posts. However, if your pole refuses to budge, try digging out the rest.
If the jack doesn’t provide enough support, try connecting the chain to something even larger like a power lift.
Look for copper naphthenate solutions at home improvement and paint stores. You can apply the solution by brushing it onto the post or dipping the post into a tub filled with the liquid.
Your aggregate should provide a sizeable cushion between the bottom of the hole and the base of your pole, so pour in a liberal amount. Aggregate helps water drain more quickly, preventing mildew and rot.
If the pole won’t stand up on its own, ask a friend to hold it or place small stakes around the base.
Wear protective eyewear, working gloves, and long-sleeved clothes to keep your eyes and skin safe from the concrete. If you get concrete on your skin, scrub it off and run the area under clean water for a minimum of 20 minutes. If necessary, prevent burning by adding vinegar or citrus to the water. [13] X Research source If you get concrete on your clothes, remove them immediately and rinse them in clean water. [14] X Research source
