For example, if you are making a dark brown jacket, then you will most likely want to use another earth tone, such as medium brown, beige, or tan. For a more striking look, try choosing a lining in a contrasting color, such as a red lining for a white jacket or a lime green lining for a hot pink jacket.

Fabrics that make good linings include silk, satin, and acetate. Avoid rough fabrics, such as flannel, wool, and fleece. Silk works best for a summer jacket. [3] X Expert Source Alessio IadiciccoApparel Manufacturing Specialist Expert Interview. 16 June 2021. Use a thicker shaved lining for a winter jacket. [4] X Expert Source Alessio IadiciccoApparel Manufacturing Specialist Expert Interview. 16 June 2021. Bemberg lining is a great basic lining for a jacket. It’s soft, silky, and affordable. [5] X Expert Source Alessio IadiciccoApparel Manufacturing Specialist Expert Interview. 16 June 2021.

For example, if the lining fabric is dry clean only and the outer fabric of the jacket is machine washable, then the entire jacket would need to be dry cleaned each time it is dirty.

Avoid heavyweight fabrics, such as wool and linen, which tend to be thicker and less flexible than lightweight fabrics, such as cotton and silk.

Add together the total length of the front and back of the jacket and the sleeve length. For example, if your jacket pattern will create a jacket that is 30 inches (76 cm) long in the front and back, and it will have sleeves that are 26 inches (66 cm) long, then add 30 + 30 +26 for a total of 86 inches (220 cm).

For example, cotton will most likely shrink the first time you wash it, so you should definitely wash cotton fabric. Keep in mind that any fabrics that are dry clean only will not require any pretreatment, such as wool and silk.

Be sure to check the pattern pieces for instructions on how to position them on the fabric. For example, some pieces will need to be positioned along a fold, while others are fine to place anywhere on the fabric. You will also need to consider your fabric’s grainline, and cut out any darts or notches indicated by the pattern. [11] X Research source

For example, if you are making a black jacket with a grey lining, opt for a black thread. For a red jacket with a black lining, opt for a red or black thread.

For example, the zigzag stitch setting will be more noticeable, so only use this stitch if your pattern calls for it.

For example, the pattern pieces may have darts or notches on them to indicate where two pieces should line up.

The pins should be about 0. 25 inches (0. 64 cm) to 0. 5 inches (1. 3 cm) from the raw edges of the fabric pieces.

If the jacket sleeve lining is considerably longer than the jacket sleeve, then trim down the lining so that the jacket sleeve and lining sleeve are even.

Do this for both sleeves.

Do this for both sleeves. Remove the pins as you sew.

You can use your sewing machine for this, or you may sew the gap closed by hand if it seems easier to you.