Mono lines also do well if you’re using a jig or live-bait. [1] X Research source

Fluorocarbon lines are considered a type of monofilament line, so they are also great for fishing with jigs, live-bait, or in crystal clear waters.

The line is visible and it floats well, so be selective when using it. Because it sinks slowly, it goes great when using top-water baits. [2] X Research source

Spinning reels are designed to hang down from the rod, not rest above it like spincasting and baitcasting reels are. To hold the reel properly when it’s not mounted on the rod, wrap the fingers of your casting hand around the mounting bar and let the reel hang from that hand while reeling with your other hand.

You can also use scissors to cut the line. To tie an arbor knot, wrap the line around the arbor and tie an overhead knot in the standing line. Tie a second overhead knot in the tag end, just about 1 in (2. 5 cm) from the first overhead knot. Pull the standing line to slide the first knot down to the spool and slide the second knot down to the first. [6] X Research source

If your line is twisted or the line doesn’t line up when the label side of the spool is facing up, flip it over. This will help avoid any problems with the line becoming twisted.

If the line is twisting, strip some of the line back off of your reel and realign your spool and line. Always apply light pressure to your line while you load it. If you don’t the line will go on loose and end up becoming tangled later. [9] X Expert Source Michael ReynoldsProfessional Fishing Instructor Expert Interview. 26 February 2021.

If you find a line twist you may need to start the process over again. If you have already flipped your spool after the first inspection, straighten out the twist and continue slowly.

Never fill the spool to the very edge. [12] X Expert Source Michael ReynoldsProfessional Fishing Instructor Expert Interview. 26 February 2021. Under filling or overloading the spool will cause tangles and problems with casting.

You can use scissors if you do not have line cutters.

You can also wrap a rubber band around the spool. If your spool comes with a tab in it, you can also tie the end of the line around the tab.