Integral Color:[3] X Research source Liquid Color into the ready mix truck. This procedure combines the color with the mix prior to the pour and the slab is colored throughout, or: Broadcast Method: Apply color hardener powder directly to the freshly poured concrete surface. Color hardener will penetrate the top of the concrete slab 1/8" and color thoroughly.
Worker 1: Fluffs the release agent throughout the application process. Broadcasts release agent. Identifies areas that require touch up work. Acts as a general helper. Worker 2: Places the texture mats. The first mat should be carefully aligned, placed and tamped in at the starting point of the project. Repeat the process by placing the second mat next to the first. Place mats tightly together to avoid messy grout line patterns. Continue with mats on hand, leapfrogging the mats as they are removed and replaced in the concrete. A minimum of three mats should be used for smaller pours. Larger projects require additional mats. Worker 3: Tamps the mats as they are placed. Mats should be tamped straight down into the concrete using no more force than necessary to press the mat flush to the concrete. Do not over tamp! Worker 4: Carefully removes the tamped mats by lifting gradually from one side first to break the suction. Passes mats to Worker 1 for preparation of next placement.
For patios and high foot traffic areas you should seal stamped concrete on a yearly basis.
