Try sitting on an ATV to make sure it feels comfortable and you can reach all of the handles and gears. Using an ATV that is too large, powerful, or unwieldy for you could result in an accident.
Wearing protective gear will reduce your chances of getting injured, especially if you’re new to riding. Make sure the helmet and gear fit properly and allow you to see properly. You can find ATV protective gear at ATV supply shops, at sports and outdoor stores, and online.
You can find nerf bars at sports and outdoor stores, at ATV supply stores, and online. Nerf bars also make it easier for you to learn how to turn, use the clutch, and shift gears.
Hanging a leg outside of your ATV can also shift your weight off-balance, which can cause the ATV to tip or you to fall off.
It’s also against the law in many places to drive an ATV on a paved road.
Check your local government’s website for a list of rules regarding ATVs.
An empty field or a large backyard would work as a suitable practice area.
If you’re riding in cold weather conditions, allow the engine to run for 5 minutes so it can heat up before you ride.
While you’re in the neutral gear, your ATV can continue to roll forward, but you will not be able to add any speed. You need to place the engine into first gear in order to start moving.
Practice riding around, then slowly increase your speed, and work to shift into higher gears to get used to riding.
Shift into lower gears one at a time to allow your engine to adjust to the lower speeds and gears.
If you squeeze both brakes at the same time, you may tumble forward over the handlebars. Squeezing the left handle to brake the front wheels only can cause the ATV to flip over.
It can help to stand up from the seat so you can lean further if you’re taking a harder turn.
Ask your ATV dealer if they provide instruction or can recommend a course. You may be required to take a certification course in order to be legally allowed to ride your ATV.
