Keep in mind, if there aren’t any appropriate spaces very close to your home, you can invest in a wheelbarrow to make transferring the firewood easier.
Surfaces like concrete, asphalt, and clean gravel can be good surfaces for firewood. If you can’t find any appropriate surfaces, you can use sticks to elevate firewood off of the ground. You can also lay down a tarp underneath firewood.
You can also store firewood in your garage.
You can store firewood in an old trunk, if you have one. Some fireplaces have compartments built into the wall next to them where you can store firewood. Make sure firewood you store indoors is fully dry. If you chopped or collected your own firewood, you should store it outside until it dries. It takes firewood around six months to fully dry out. [4] X Research source
Lay the boards on the ground about 15 inches apart. Lay down as many rows of boards as you need to stack all your firewood. Lay your firewood over the boards, keeping them parallel to the boards. The boards should elevate the firewood off the ground slightly, preventing it from touching the soil.
It’s important to allow for some air circulation, as you don’t want your firewood to get too dry. You should leave the sides of your stack open to allow for airflow.
You should always stack your firewood rather than throwing it in a pile. This will promote air circulation and keep firewood from drying out. Never stack firewood against a wall when stacking it outdoors. This can leave firewood vulnerable to moisture and bacteria. Always leave a few inches of space between your firewood and a wall. Never place firewood against the side of a wooden structure, including your house, because this will invite termites and carpenter ants to feast on your home.
If it’s going to rain, it’s appropriate to cover wet firewood with a tarp. Just make sure to leave the sides of firewood pile uncovered.
Dry firewood will be gray with cracks along the edges. Dry firewood will also be much lighter than wet firewood.
