a pair of boot cut or flair jeans pins a sewing machine thread
For example, if the jeans are tight around your hips and thighs, but loose around your calves and ankles, then you will need to take them in around the calves and ankles.
If the crotch is baggy, then you might want to pin along the inside edges of your jeans instead. That will make it easier to take in the crotch as well. If the jeans are extremely baggy, then you may need to pin the inner and outer edges of your jeans. [5] X Research source Skinny jeans are often made with a lot of stretch so they’re easy to take on and off. If your flare jeans don’t have stretch, make sure you leave enough space so you can still easily get them over your ankles and feet. [6] X Expert Source Mia DanilowiczMaster Tailor Expert Interview. 8 January 2021. When you are happy with the placement of your pins, you can take off the jeans. Remove them carefully so that the pins do not come loose.
Remove the pins as you sew. Sew the other leg after you finish the first one.
Repeat the same stitch on the other leg.
Try to leave about ¼” to ½” of fabric past the zigzag stitch. [11] X Research source
Try on a pair of shoes that you want to wear with your skinny jeans to determine if the hem looks right. Keep in mind that you can always fold, tuck, or scrunch up the bottoms of your skinny jeans if you decide not to hem the bottoms.
Then, divide the distance between the bottom fold and the start of the original hem in half. For example, if the distance was three inches, then 1 ½ inches is your new number. Measure from the edge of the original hem to the new number. Then, pin the bottom of your jeans at this level.
