Avoid putting the machine on the edge of a countertop or anywhere where it might be knocked over.
If you’d rather not take the tank out of the machine, pour water directly into the tank, being careful not to overfill it.
It’s important that the machine heats up so that your drink can be made properly.
If you’re using a coffee pod instead of ground coffee, place the pod in the filter instead. Check that the pod you’re using has an ESE label on it to ensure it works with the machine. If you have access to a scale, take time to measure out the espresso grounds before putting them into the machine. Coffee can hold twice its weight in water, so whatever amount you put into the portafilter should yield double the dosage.
The tamper is attached to the right side of the machine.
If you need to turn the machine off while it’s brewing, like if your cup is already full, switch the knob to the “O” to the left.
The steam option shows an icon of a steam cloud. Wait until the green light pops up on the steam option after you turn the knob to it before using it.
Turn the hot water off by switching the knob to the “O. ”
You can also fill the water tank without taking it out by pouring cups of water directly into the tank. Just make sure you don’t overfill it.
If you don’t press anything for 15 seconds, the machine will exit the settings mode.
If you’re only making one coffee, use the filter with one coffee filter symbol on it, while if you’re making two coffees, choose the filter with a picture of two coffee filters. Sweep off any extra coffee from the rim of the filter holder before inserting it. Once you’ve inserted the filter holder, twist it until it lines up with the “Close” label.
Choose pods that have an ESE symbol on them, showing that they work with the machine. Follow the instructions that come on the specific pod you’re using to ensure it works properly. Twist the filter holder to the “Close” position once you’ve inserted it.
Pour the frothed milk into your cup of coffee to create the cappuccino.
The steam option shows an icon of a mini cloud, or puff of steam. Don’t pour out hot water for more than 60 seconds, according to the De’Longhi EC680 instruction manual.
Fill the tank up without removing it from the machine by pouring water directly into the tank with the lid open. Be careful not to overfill it if you choose to do it this way.
Once the first tank of water has all been drained, the machine is ready for its first cup of coffee.
Make sure you place your cup under the spout before turning the knob and starting the cup of coffee. Once you have enough coffee, switch the knob to “On” to interrupt it. Twist the filter holder to lock it into place once it’s inserted in the machine.
When the filter holder is locked in place, it will be facing directly in front of the machine. Read the instructions on the pod to be sure you brew your coffee correctly, and only use pods with an ESE label to be sure they work with your machine.
Once the milk has become frothy and doubled in size, turn the knob to the Off position. This milk can be added to a regular cup of coffee to create a cappuccino.
