A Standard SIM is 15mm by 25 mm. [1] X Research source A Micro SIM is 12mm by 15mm. A Nano SIM is 8. 8mm by 12. 3mm. You can cut larger SIMs down with a special SIM cutter tool, or just ask your carrier for the correct size. If the SIM you have is too small to fit into the new phone, you can get an adapter card—these cars let you place a smaller SIM (such as a Nano SIM) inside a card that’s larger (Micro or Standard).

Phone carriers used to operate only two types of networks: GSM and CDMA. It used to be true that most CDMA phones didn’t require SIM cards, but that’s no longer the case—unless you’re using an older CDMA model, you’ll definitely need a SIM. If the new phone is from a different carrier than the SIM you have, the SIM may still work if the phone is carrier-unlocked. But if the phone is locked to a specific carrier or account, you’ll need to have the carrier unlock the phone.

It’s no longer possible to transfer contacts directly to a SIM on an iPhone.

Although it may not be required depending on the models, turning off both phones before you begin can help ensure that removing and inserting a SIM card goes smoothly. If your phone has an eSIM (and electronic SIM card), you can’t physically remove it from a phone. If you need to transfer your eSIM to a new phone, your carrier will need to do the swap. Give your carrier a call for assistance.

iPhone: iPhones have SIM trays, which are located in different places depending on the model. [3] X Research source Look for the small hole on a rectangular panel: Left side: iPhone 12 (all models). Right side: iPhone 11 (all models), iPhone XS & Max, iPhone XR, iPhone X, iPhone SE (all models), and all models of iPhone 8, 7, 6, 5, and 4. Android: If your Android has a removable battery, you’ll usually find the SIM card behind the battery or otherwise inside the battery cover. If not, you’ll have a SIM tray on one of the phone’s edges. The location is different depending on your Android, but you can identify the SIM tray by locating the small round hole on a rectangular panel.

Left side: iPhone 12 (all models). Right side: iPhone 11 (all models), iPhone XS & Max, iPhone XR, iPhone X, iPhone SE (all models), and all models of iPhone 8, 7, 6, 5, and 4.

If there is a SIM tray, you should have a SIM tool that came with your phone. It’s usually a small oval-shaped tool with one pointed protruding end that’s has the diameter of a paperclip. If you don’t have the original tool, you can use a paperclip—just extend one end of the paperclip so it’s pointed outright, and then insert it into the hole on the SIM tray. Push in gently until the tray pops out. Then, lift the SIM card from its place inside the tray, or just flip the phone over so it falls onto a soft surface. If the SIM is behind your battery, you can either slide it out or press it in a little to pop it out, depending on your phone. If you wind up damaging your SIM card during the swap, you can usually get a replacement SIM at no cost from your provider.

If the SIM is too small for the tray or slot in the new phone, get an adapter card kit—these kits are cheap and come with adapters that accommodate all three SIM sizes.

When activating a new phone, you’ll be asked to sign in with a Google or iCloud account/Apple ID. If you backed up your contacts from your old phone to your Google or iCloud account, make sure you sign in with the same account info as you used on the old phone. This ensures that your contacts sync to your new phone. If your phone was already set up, you’ll usually get service a few moments after you insert your SIM card. Just insert the SIM card, power it on if it wasn’t on already, then wait to see if you connect. You’ll see the signal bars appear in the phone’s notification area, and you’ll usually see the carrier name next to them.